__________________________________________________________________________

Gasifying Boilers for Wood

If you have timber freely available why pay for Oil or Gas to heat your home. This boiler will heat your home for less. very easy to use and there is a €2,000 SEI grant available for these units.

CLICK HERE OR MORE INFORMATION>>>>>

The boilers are constructed for burning wood on the principle of generator gasifying with the use of a gas exhaust ventilator, which withdraws the combustion gases from the boiler, or leads air into the boiler.

The boiler body is produced as a weldment of 3-8 mm steel sheets. They comprise the fuel hopper, which is equipped at the bottom with a heatproof pipe fitting with longitudinal hole for the combustion gases and passage of gases. The burnout part of the multiple chamber furnace under the fuel hopper is equipped with ceramic pipe fittings. There is a vertical combustion gas duct in the back of the boiler body, which is equipped with a heating valve in the upper section. The upper part of the combustion gas duct is fitted with a gas exhaust outlet for connection to a chimney.

We also stock a combined boiler for use with pellet and wood

ENVIRONMENT

Reverse combustion and a ceramic combustion chamber enable perfect combustion with minimum polluting emissions. The boilers comply with environmentally-friendly product requirements according to Guideline No. 13/2002 of the Czech Ministry of Environment. They comply the European Standard EN 303-5 and all the boilers rate in class 3

INSTALLATION

ATMOS boilers must be connected via the LADDOMAT 21 or ESBE thermoregulation valve to achieve keeping the minimum temperature of water returning to boiler at 65°C. The temperature of water exiting the boiler must be permanently kept between 80º - 90°C. The default configuration of all boilers includes a cooling circuit to prevent overheating. We recommend installing boilers with accumulation tanks.

CERTIFICATION

All ATMOS boilers are certified in testing laboratories for the individual countries of destination: State Testing Laboratory Brno, TÜV Munich - Germany, Lithuania, Ukraine, Sweden, Poland, Austria, Slovakia, Hungary according to current standards - EN 303-5.

Protected by patent.

Advantages of Wood Gasification Boilers ATMOS:

* Option to burn large pieces of wood
* Primary and secondary air is also preheated to a high temperature -    higher effectiveness
* The ventilator automatically switches off when the fuel but out.
* Ceramic combustion space - high effectiveness
* Large fuel container
* Large space for ash (when burning wood you have to clean it once per    week)
* Boiler without tube plate - easier cleaning
* Small size and low weight
* High quality

If you require any further information about our range of wood gasification products please contact us.

Click Here for more info >>>>


 

Firewarm Stoves with and without back boilers

Multi fuel from 4KW to 30KW

Multi Fuel Stoves

The Firewarm range of multifuel stoves is ideal for burning wood, coal or peat.

Using the best in high temperature glass, combined with Firewarm combustion technology delivers consistently clean glass for unrestricted viewing of the fire through the large glass window.

CLICK HERE FOR BROCHURE>>>

Get a quote Click here>>>